- Electronic drivers sries
-
DELVO7000 & 8000 Series
-
- *
7020/8020φ32、8120/8251φ40、7120/7251φ40
- *
-
Specifications Modei/Lever start
Push startDLV7020
DLV8020DLV7120
DLV8120DLV7130
DLV8130DLV7140
DLV8140DLV7220
DLV8220Output torque (Nm) 0.05-0.55 0.25-0.75 0.5-1.7 1.2-3 0.35-0.7 No load speed (r.p.m.) 900 1.000 1.000 700 3.000 Unit weight (grams) about 1,000 about 1.200 Screws Small
screws26-3 2.6-3 2.6-4 3.5-5 2.6-3 Tapping
screws26-3 2.6-3 2.6-4 3.5-5 2.6-3 Supply voltage AC 100V 50/60Hz Modei/Lever start
Push startDLV7231
DLV8231DLV7241
DLV8241DLV7251
DLV8251DLV30A06L
DLV30A06PDLV30A12L
DLV30A12POutput torque (Nm) 0.5-1.7 1.2-3 2-4.5 0.4-3.0 No load speed (r.p.m.) 2.000 1.200 700 650 1.200 Unit weight (grams) about 1.200 Screws Small
screws2.6-4 3.5-5 4.5-6 2.6-5.0 Tapping
screws2.6-4 3.5-5 4.5-6 2.5-4.0 Supply voltage AC 100V 50/60Hz Modei/Lever start
Push startDLV30A20L
DLV30A20PDLV45A06L
DLV45A06PDLV45A12L
DLV45A12PDLV70A06L
DLV70A06POutput torque (Nm) 0.4-3.0 2.0-4.5 3.8-7.0 No load speed (r.p.m.) 2.000 650 1,200 650 Unit weight (grams) about 1.200 Screws Small
screws2.6-5.0 4.5-6.0 5.0-8.0 Tapping
screws2.5-4.0 4.0-5.0 4.5-6.0 Supply voltage AC 100V 50/60Hz
- Air drivers series
-
Air drivers 35AS, 40s, 40 and 50 Series
-
- *
model 35AS φ34 model 40S φ33
model 40 φ40 model 50 φ40
- *
-
Specifications Model Model 35AS Model 40S Model 40 Model 50 Screws φ2.5-φ3 φ2.5-φ4 φ3-φ4 φ5-φ6 Tightening performance 5 to 50 pcs/minute Startup method Lever start Push-start Lever start Lever start Bit rpm (no-load) (r.p.m.) 2.000 2.300 1.400 1.400 Output torque (Nm) 0.5-1.5 0.5-1.5 1.0-2.5 1.5-3 Unit weight (grams) about 1,100
- Delvo 30 series
-
-
Driver Specifications Model Lever start DLV30A06L DLV30A12L DLV30A20L Push start DLV30A06P DLV30A12P DLV30A20P Output
torque(N・m)
Spring for low torque
(Supplied accessory)
0.4 to 1.6
Spring for high torque
(Equipped as standard)
1.2 to 3.0
Free speed(min-1) 650 1200 2000 Input voltage 100V AC 50/60Hz Power consumption(W) 45 Plug shape Grounded 3-pin plug(3m) Main unit weight(g) Approx.1,300 Applicable(mm) Small screw 2.6 to 5.0 Tapping screw 2.5 to 4.0
- Nipple temporary - tightening fastener
-
Air drivers 35AS, 40s
-
- ※(B)
Model 35AS φ34、Model 40Sφ33
Typical models - #13-40S
- #9-40S
- #14-40S
- #10-40S
- #15-40S
- #11-40S
※Available for any 35A (lever start) - ※(B)
-
Specifications Model Model 35AS Model 40S Screws φ2.5-φ3 φ2.5-φ4 Tightening performance to 50 pcs/minute Startup method Lever start Push-start Bit rpm (no-load) (r.p.m.) 2,000 2,300 Output torque temporary-tightening Unit weight (grams) about 1,100 Usable nipples Screw head diameter Screw Shank Bicycle
nipples#13 φ7 φ4.3 #14 φ6.5 φ4 #15 φ6.5 φ4 Motorcycle
nipples#6 φ12 φ8.4 #8 φ11 φ7 #9 φ9.5 φ6.5 #9New φ10 φ6.5 #10 φ9 φ5.8 #10New φ9.5 φ5.8 #11 φ8 φ5